Reporting

Hi, is there an easy way to remove rows with zeros from the Cube View when using GetDataCell? Thanks GetDataCell(S#|!Scenario!|_Allocations:U3#None:U4#None:U5#None:U6#None:U8#PCRunRate - S#PPM_|!Scenario!|_Lite:UD2#PrjNa):Name(Variance)  

Hi everyoneIs there a way to preserve formatting in a Quick View (not Cube View) in Spreadsheet or Excel Add-in on certain row levels? E.g. Font colour for base members = Blue.With Cube Views in Spreadsheet or Excel Add-in you can highlight the levels and assign Styles but this is not available in Quick Views, only in certain sections of the Quick View grid, e.g. Primary Style, Upper Left Style, Row Header, Column Header Style and Data Style.I noticed in the 8.5.1 version documentation that this option is available when you create a new Quick View, but not in the 7.4 version we are using:RegardsJohan

Hi Everyone, Does anyone know whether it is possible to Lock V#Annotation for input? Any assistance will be appreciated Thank you!

Hi All, We have a requirement to get journal report for all entities irrespective of which workflow was used to post the journals Example - There are different BU related workflow ( example BU M workflow )which has individual BU related entities assigned and there is another work flow - Central Group Adjustments which does not have any entity assignment. Users from BU M workflows would like to see all the journals posted via Central Group Adjustments which are related to BU M entities. We have different securities for each BU workflows and Central Group Adjustments as well. Basically all BU users should not have access to Central Group Adjustments workflow , but they would like see / view all the journal posted for respective workflow assigned entities.  We can always have an option to give read only access to Central Group Adjustments , but just wanted to check if there is any report which shows all the journals posted from another workflows as well ( assuming

I am recently created a cubeview report that I am now trying to add to Oneplace to allow our user community to run the report at their will.  I believe I need to do this by going through the Framework Task Setup menu but am not having any success in doing so.  Does anyone have tips/tricks to offer that can help me break the ice?  I am new to building these reports and getting them setup.  Would appreciate any feedback

Just checking to see if anyone else has been experiencing the following issue with Version 8.We are currently testing the upgrade from 7.x to version 8 and have run into a huge formatting issue with our books that are produced to Excel and sent out to management via postal service. The source cube views for a batch use the same column template. We have Excel column width formatting set up for each of the columns (but consistently on each column). When the cube views are run and exported to Excel, the column width is not being recognized in most of the columns. I have tried direct formatting, I have tried with a literal parameter and getting the same results no matter what.  I don't see where I can attach the workbook itself but am attaching a screen capture sample.  In this case text wrap is set to False and column widths are set to 100.  Note the results.  Oddly, in like the first book, some of the sheets ARE recognizing the column width. I'm just wondering if anyo

Hello, I have recently uploaded the May'25 Trial Balance into OneStream and one of my reports is reporting a line item as $5 more than what the Trial Balance says it is. This particular line item is driven by a single account so the report is set up to say whatever is in account XXXXX, generate that on the report. Any suggestions as to why the report is off by $5??

Hi  I am currenty building a dashbord for our controllers, including a menu. But I would like to use the same icons as used in OneStream, e.g. Refresh Page, Help, etc. But I have not manage to find them in OneStream. Are they copyrigth'ed, unique or were can I find them? Regards  Ole  

Hi all,What is the best way to export and import a dashboard into a new application?Do I need to select all its components every time, even if some already exist in the destination?I’ve noticed that if you select only the dashboard or the embedded version, the components don’t appear in the XML file.Thanks in advance!

Dear community,   I am exploring the "web content" dashboard component, but it seems that it doesn't allow to open any "https" websites. --> Are there any way to allow integrating secured http webpages ?  

Hi all,  is there any way (we might have overlooked) to not only extract headers to excel, but also footers? Thanks Markus

I am trying to replicate the example from the design & reference guideHowever, i dont seem to have a cubeViewColumn (last line in screenshot) object. The documentation does not show an example of creating this object. Any suggestion would be much appreciated.thanks 

Hi,  I'm trying a landing page dashboard where I can put buttons that go to various locations, both inside OneStream and outside OneStream.  Some of these links will be to files in the box or SharePoint, and some will be to other Tableau dashboards.   I'm struggling to figure out how to create the Navigation Argument so i can select it with my button component.  Where do I go to build one?  Is there a blog post or article on this?

Hi. I'm looking at a way to find all cube views used in book definitions. I was thinking of exporting all xlBook files all at a time via Load/Extract but I cannot find how to do it. Is it possible? Or would there be another way of getting that information? Thanks!

Hi, Can someone point me to a syntax cheat sheet for formatting cube views and reports in Excel? I'm trying to get this number to show in thousands and have my negative numbers be in red with parentheses, and I'm super close, but I have this odd space at the end I can't seem to solve.  ChatGPT got me here:  ExcelNumberFormat = [#,##0,_);[Red](#,##0,_))] But it's stuck there. 

I'm having trouble with a dashboard I'm building. I want to display either an IS or a BS on a single dashboard frame based on user's selection. I've created a list parameter with the options "Income Statement" and "Balance Sheet". However, no matter which option I select, the dashboard only displays the IS. I suspect I'm missing a step to properly link parameter selection to switch between the two reports. I don't have much experience with multi report dashboards up to now, I've only worked on single report dashboards. Could someone help point out what I am doing wrong or guide me on how to make the report dynamically switch based on the parameter. Thanks.

I am trying to configure a data adapter through the service factory. The assembly containing the services factory is on another maintenance unit. The assembly is WsasFactory and when attempting to bring the data set into an adapter it can't seem to find that object reference to the assembly. The assembly and service factory are configured on each maintenance unit and workspace as shown: MyAssembly.WsasFactoryWhen attempting to bring it into the data adapter I have tried using...{WSMU}{MyDataSet}{}{WS}{MyDataSet}{}{Workspace.Current.WS}{MyDataSet}Yet, I keep getting this error for each reference shown above - Error processing DataSet 'MenuNavPM'. Unable to find the Workspace Assembly Service Factory class for name 'WSMU' in Workspace Is there a reference special for using the service factory between maintenance units I am missing? 

Hello ...  We are trying to output the formula for Accounts of type DynamicCalc in a cube using an U8 member named U8#AccountFormula. In this member we have defined the following: Return api.Account.Formula(api.Pov.Account.MemberId,API.Pov.Scenario.MemberID,Api.Pov.Time.MemberId) The code above only seems to work for all Accounts except type DynamicCalc Is there another function we should be leveraging? Thanks  

Hello, Would it be possible for me to generate a CubeView using multiple cubes? I know it would be possible using an XFGETCELL since we have to point to the specific cube in the formula. We are currently utilizing a single cube with all the parent and base level members in our dimensions and are transitioning into 2 Cubes (1 for the summary/parent level and 1 for all base level members). Our existing reports for example A#NET_INCOME.treedescendantsinclusive would work fine in our single cube, but it may not work when we move the parent & base level members to separate cubes.

Hello, We are currently creating a series of dashboards at my team and have primarily used Chart (Advanced) components as these fit our needs the most closely. However, one limitation we have come across is that sometimes it's more fitting to have the Point Label Format in thousands and sometimes in millions. Is there a way to make the component decide which format to use automatically? I suspect that it might be possible considering you can do the following to handle negative values and hide zeros: {V:0,,M;(0,,M);''} I was thinking one might be able to do something similar for different magnitude values. Thanks in advance!

Hi, I'm trying to understand the best way to add annotations and comments in OneStream to explain variances. Last week at splash I was advised to use V#Annotation or V#VarianceExplanation.  But what I'm confused about is how do you actually get it connected to the calculated variance (red box), versus only being able to connect it so the actual reported number (yellow box).  Right now I'm using a get data formula in my quick view to calculate the variance (GetDataCell(S#Actual-S#AOP):Name(Variance)).What are other people doing when trying to provide commentary on variances?  Whats the best way to use this view?  

We have a large flat hierarchy, members starting with Px_1000 to Px_9999. For example, P1_1000_27 Project 1, P5_1001 Project Yellow.... P7_9999 Project Bob. The numbers are unique (no two same number). We want a report that allows users to enter a "From" - "To" to pull back members in that range. For instance, only pull back members in the range "From" 500 To "532". Have an XFBR where I'm parsing the string, that's working, looping through and but only returning the number. The issue is that I need the entire string and description of the member. That's where I'm stuck. If anyone has done this before, would very much like know how you coded the XFBR. Thank you!

Hi all,Do you know how to get the member description in a scpecific language using the Excell add-in? I suppose that it can be done using the "XFGetMemberProperty" but I can't find an example.Thank you. XFGetMemberPropertyThis function retrieves any Dimension Member property from the Member Properties tab in the Dimension Library. Note there are no spaces used when defining property name.XFGetMemberProperty(“DimTypeName”,“MemberName or Script”,“PropertyName”, “VaryByCubeTypeName”,“VaryByScenarioTypeName”,“VaryByTimeName”) As a reference when using BR: Get member description in user's culture code | OneStream CommunityBest regards,Carlos

I am using a Cube View (IS) within a dashboard. The client does not want users to be prompted with parameters for selecting Entity, Time, or View. Instead, they expect these dimensions to be driven automatically by the Workflow Point of View While I’ve successfully applied WF  Time and View dimensions in the CV to align with the Workflow POV, I’m encountering an issue with the Entity dimension. It does not respond to the Workflow POV such sd WF, WFProfile, etc..  I either have to hardcode it, or use the Parmeter. Can I create a parameter that does not prompt a user make a selection?

I have some users who can't see the Map Transformation Report under the Application Reports.   I have check their POV (looks correct), can't find anything under Dashboard security.  Anyone have any suggestions as to why they can view some but not all the application reports?  The POV appears to be set properly and they can view the transformation rules other ways, so I don't think it's a security setting.  At a lost, has anyone encountered this?