OneStream Platform Forums

Does anyone have information on how to restrict (No access) on scenario  Member, The app has the entity security setup. i tried with Data cell access Security "on the cube data access" not able to figure out. if any one gone through this scenario please help. Thanks PK  

Hi All, We have a client who is concerned about users being able to delete and reload journal entry attachments. From what I can see there is no audit record of this, the items show up in the ‘Attachment’ table when posted but once deleted there is no record of this being deleted. From what I can tell there isn’t a separate audit table associated with this. Does anyone know if there is way to prevent users from being able to delete an attachment or a way to provide an audit of items that were changed? I also was trying to find where attachments for Journals get stored to see if changing security on a folder was possible (maybe the only record is the table itself and this isn’t an option). Another idea was an event handler but it doesn’t seem like deleting an attachment is considered an event. Any thoughts or suggestions would be appreciated!

Hi All, How can I show Cell Detail Classification in the report ? Thanks

Does anyone know how to use VBA code to save offline copy?  I know VBA support the following, but anything for save offline copy? RefreshXFFunctions()  RefreshXFFunctionsForActiveWorksheet() RefreshQuickViews() RefreshQuickViewsForActiveWorksheet() RefreshCubeViews() RefreshCubeViewsForActiveWorkSheet() ShowParametersDlg() ShowParametersDlgForActiveWorksheet() Thanks

Hi All, I am trying to display percentage values for the different continents in a BI Viewer component with a Choropleth Map. The display of the values works, but I would like to see only one label per continent, as is the case with South America, for example, and not for each individual country, as is the case with Africa and the other continents. Is there a way to change the labeling to only once per continent?

Hello, Got a question. We are trying to configure Smart Integration Connector. With respect to that can you please send us the list of IP address to whitelist for the Azure Relay of Onestream Thanks in Advance    

We currently have a cube view built out to compare specific GL account values from quarter to quarter. Some of these values needs to be translated using using FX rates. We have AverageRate and ClosingRate, but when assigning the Currency in the Cube view it seems to default to AverageRate, but the requirement is to be using ClosingRate values.  Is this best way to do this through an XFBR rule? Help is greatly appreciated, thanks!

What are the different options available to integrate SAP RISE (SAP Cloud) to OneStream? Is there any adapter available? have anyone implemented this integration?

Hello OneStream Experts: I created an account called MyAcct to store calculation. I run the business rule in Data Management step and put Net Income to MyAcct. api.Data.Calculate("A#MyAcct = A#NETINC") After I run the business rule, the Calc Status in View dimension show CA for both NETINC and MyAcct. However, after I run right click the data cell to run consolidation or Calculation, the value in MyAcct got lost, the calc Status for NETINC became OK. I wonder why my calculated account lost the data value after I run consolidation. Thank you advance for any answers.

Hi, I'm a new-ish user to OneStream and the QuickViews.  Is there a way to prevent a dimension from repeating when you refresh - for example, I want monthly (periodic) columns with a specific UD#7 variable - we will call it A.  Then, I want YTD with a different UD#7 member, B for YTD view.  Whenever I refresh the QuickView, OneStream will give me both A and B for all periodic and YTD data.  Is there a way around this? I don't want YTD with UD#7 member A or Periodic with UD#7 member B but not sure what I need to change for the ad-hoc build.  Thank you!

Hello there, As intuitive as it seems, I'm trying to pass bound parameters from a CView to a DM Sequence. Upon selecting a CView cell, I click on a 1st button to open a dialog window (at this stage, bound params are resolved). But, within this dialog, once I click on 2nd button that launches my DM Sequence that uses the previously resolved params; I retrieve " |!mySelectedAccount!| " instead of the needed value. Button Configuration: DM Step Configuration: Solution Attempts: Since I am able to retrieve the bound params on the 1st button click, I tried storing them to a 'Literal Parameter' that uses an XFBR to string.join values, but when I try retrieving the literal param value i get " XFBR(BR,Function, Account=|!mySelectedAccount!|, Entity= ... " instead of resolving the XFBR ( Which is normal ?) I tried using "Globals" but I get the same result ... literal value instead of resolved value

Hi all, Currently I have a cube view with GetDataCell formula for ad hoc calculation, may I know is there any rounding off function in the GetDataCell formula? For example, we would like to have a formula like Round(A#100) - Round(A#200). Thanks a lot for any possible solutions.

Hello OneStream experts: I created and account=MyAccount and put member formula. api.Data.Calculate("A#MyAccount = A#NETINC") I set AccountType=Dynamic Calc Formula Type=Formula Pass 1 I am able to compile the syntax and run the calculation successfully. But MyAccount account member showing no data from my quick view excel sheet. My NETINC account has data. I wonder why the calculation is not working. Thank you for any feedbacks. 

Hello - Does anyone used the AWS SDK (Dot Net) to download the file to the OS batch harvest folder? using SIC if so, could you please provide high level steps?   Any Help would be appreciated.

Hi , I used the journal event handler extensibility rule available on the forum in order to segregate the approval and post process. The issue that i am having is that once the user submits the journal or quick posts it the page does not refresh on its own and the user has to manually refresh the page to the see the journal status . Basically it should show the submitted status and approval and reject buttons highlighted but it only shows that after the user manually refreshes. Is there a way we can refresh the page after the message is displayed?  

Hi all, I have created cube view wherein I have used E#Test.Base in Member Filter 1  (Test have 2 children A and B). I need A and B in Member Filter 2 to act as param value in the Dashboard XFBR String. How can I achieve this ? Thanks  

Hi i now have access to Onestream Navigator and would like some recommendations of which courses to complete to get an understanding of how to extract data out of Onestream  Does anybody have any courses that were done that would be of help

Hi All , I was trying to build a dashboard with a Index or a guided List like below. For the below dashboard these are the steps I took :  a. Created A Delimited Parameter  with all the reports  b. Created an embedded dashboard with the value of this parameter  c. Created a List Box with the delimited parameter.  So on the Main dashboard when one click on any of the values on the list , the Dashboard opens on the right.  Although it works , I noticed that the performance of the dashboard is quite bad compared to if I create the same dashboard with tabs .  Both the dashboards are using the same underlying cube view then why is there a difference in Performance ?  Is there something wrong with my approach ?  Tabbed dashboard   Regards, Saurav

HI All Does anyone know a way to extract a given Hierarchy to Excel broken out by columns for each layer ie a parent in one and children in the other. Using HFM in the past, I recall being able to extract the different hierarchies to Excel but thus far havent found a nice way to do this in OS. Of course I can pull the hierarchies into a cube view and export to exel which does have some visual indentation but its all in one column. Appreciate any ideas! ThanksTahir

We have developed cube view for BS level commentary to avoid the business excel and email conversation on close process.But we need suggestion on threshold setup to commentary column to allow users to input. Ex: If Var% > 10% only users allow to enter commentary else   not.

I am working with text editors and found that when I try to undo something I keep getting the "Object reference not set to an instance of an object." error. Does anyone know if this has been fixed in newer versions (currently using 7.4.2 for this) or if there is a way to fix this within the application?

How to create a form with dynamic cost buckets (columns) that change every year for different entities in OneStream ?

Hi Team, I wanted to double check if origin Import can be used within XFSetCell. It gives me error and my assumption is we can only use origin Forms.  It's strange that this field is not predefined and we can type there "import": Many thanks!  

Hi, Can somebody please tell me the process/code of clearing multiple errors let's say 12 pages from Error Log in one go? There is a limitation in Administrator Solution Tools to delete logs prior to 30 days. I would really appreciate the help. Thanks  

I created a parameter to specify the dimensions that I want to pull into a Word document.  I want to format the data cells to show a "-" and not a zero but I cannot get that to work.   I tried : NumberFormat =[#,##0;(#,##0);-] NumberFormat =[#,##0;(#,##0);” – “] It only shows an empty space and not a -